Master Knob/Switch Layout List!

James! · **Posted:** Fri Mar 13, 2009 3:48 pm

Hey guys!

I'm not sure where the proper place to put this is. So for now, it's here. I'll leave it up to the mods to put it wherever is appropriate, whether that be individual pedal forums, in the .pdf instructions, or in the trash.

Without further adieu, the knob/switch layout for every current pedal (except the OD2 which has one in it's instructions).

I'd like to thanks MSPaint, I couldn't have done it without you. Also, mmarsh for telling me about the Leeds toggle since every Leeds thread dissapeared in Forumgate '09. This is my Magnum Opus. I will now be retiring from the forum. (Or promoted to mod status!! :wink:

)

-J!

snizzle · **Joined:** Sun Jan 11, 2009 10:49 pm **Posts:** 231

Bravo. I can definitely see this coming I'm handy.

ckyvick · **Posted:** Fri Mar 13, 2009 4:54 pm

awesome!!! got specific measurements so these could be useful for drilling? that way one could just order a finished box from ppp and sell the one that comes with the kit

James! · **Posted:** Fri Mar 13, 2009 5:01 pm

ckyvick wrote:

awesome!!! got specific measurements so these could be useful for drilling? that way one could just order a finished box from ppp and sell the one that comes with the kit

So in my head when I was spending a few hours making this, I imagined that once I posted it my computer would be like a slot machine and a light would go off and there'd be music and money would just start pouring out all over my keyboard... (I'm waiting...)

Sorry, no. I'm not a mod/beta/anything special, so I don't have any real info. I just went through all the instruction manuals/pedal pages/completed pics and compiled this.

If someone wanted to get a drilled/powdercoated box and they were working off of a kit, they can just send the "kit" enclosure to PPP and they'll powdercoat it. That's what I did with my Delay and EQ.

-J!

kevnkar · **Posted:** Sat Mar 14, 2009 12:22 am

Nice work James!. But, where were you when I got confused about upside down and backwards with the board mounted pots and switch and labeled my Leeds all backwards! :oops:

RMosack · **Joined:** Thu Sep 13, 2007 12:11 pm **Posts:** 360

Nice job! I can see this coming in handy for a lot of people.

Where I've had the most trouble has been lining up anything with a rotary switch. For my Triboost, it took some trial and error to locate the pefect position for each of the three position labels. I imagine it'll be a little more fun with the 4 positions of the Mouse and the 6 positions on the Overdrive 2. I suppose it would be easy if I knew how many degrees each click was.

Wicker · **Posted:** Thu Apr 23, 2009 8:16 pm

Thanks James!!!!

best post ever...

jkokura · **Joined:** Mon Oct 19, 2009 2:40 pm **Posts:** 319

Anyone have something like this for the OD2?

Jacob

Build Your Own Clone Message Board

Master Knob/Switch Layout List!

Who is online