Build Your Own Clone Message Board

I am having problems with the LED on my triboost but everything else seems to work perfect. I have tried to reflow the joints but that does not seem to help. I used my multimeter to measure voltage like suggested in a previous post but don't know what the reading might suggest. Any help on an interpretation would be great...


Postive lead of the meter on Pin #1 of switch, negative lead on "LED" labeled hole on top of board, pedal in "clean" mode = 8V

Positive lead of the meter in Pin #2 of switch , negative lead on "LED" hole on top of board, pedal in "linear" mode = 8V

Positive lead to "g", negative lead to "c" in clean mode = 8V

positve lead to "b", negative to "c" in linear mode = 8V

Sounds like a bad LED. They had a bad batch of the tri-color LEDs that got out. Just email BYOC sales and they will send you a brand new one right away.

Dan