I only object to this discussion in this
thread. We try to keep the support threads narrowed down to the subject at hand so that users can find the information they are looking for without threads being cluttered up by other discussion. I'm quite familiar with the issue you're speaking to, but neither your issue with your build or the OP's issue in this thread deals with the weak phasing brought up in other threads. In this thread, the builder reported a problem with his mix pot. Once the mix pot got cleared up, it was discovered he had no phasing. No phasing is an entirely different issue than weak phasing.
That's all I'm trying to say - please do not tag onto other support threads unless the issue you're speaking to is relevant. This thread is not dealing with a weak phase when the circuit is built correctly; it's dealing with build errors. Also, there are separate lounges you can use to discuss when you have a grievance. The "Praise, Complaints, & Suggestions" lounge is a good one: http://www.buildyourownclone.com/board/index.php
I'll let this ride for a couple days, but Intend to delete these last few posts in order to keep the thread relevant.