Help for hard to find Klone parts

crbmoa · **Posted:** Thu May 03, 2012 5:43 pm

Here's the deal.

I built a bunch of Klons, and I even built the confirmation build for GtrPlaya's project.

So I had to order those stupid weird value caps and resistors.

I believe there are 2 caps and 2 resistors that are not carried by the common pedal part suppliers. But I might be forgetting, because my war chest is pretty deep, and I only ordered what I needed. YMMV.

This is the thread to ask for stuff, but here is what I am thinking:

The two caps and the two resistors are not expensive, but SOMEBODY had to buy a hundred of each! HAHA!

I am thinking a few bucks CONUS would be a lifesaver for a few of you, and not too much of a PITA for me.

Let's see how much interest there is, and I'll decide how big of a hole I want to dig, HAHA!

dcountry13 · **Posted:** Thu May 03, 2012 6:57 pm

I assume you speak of the 422K, 392K, 390nf and 3.9nf?

The 27nf can be a bit of squirmy one to grab, too.

hogan · **Joined:** Thu Aug 23, 2007 11:01 am **Posts:** 94

i'm in for 2 builds worth. thanks

tonedeaf · **Posted:** Fri May 04, 2012 9:14 am

I'm in for a build's worth, even with my own war chest of parts the crazy klone values are not amongst my wares.

sjaustin · **Posted:** Fri May 04, 2012 10:09 am

Yeah man, I'd be in for two builds' worth.

crbmoa · **Posted:** Fri May 04, 2012 10:17 am

Yes. Those are the values.

I will put together a picture and description of those 4 or 5 parts, and post it.

Chris

wstimson · **Joined:** Mon Apr 16, 2012 12:22 pm **Posts:** 126

I'd be down for one set.

crbmoa · **Posted:** Fri May 04, 2012 2:03 pm

The above pic represents ONE pack.

$3.00/shipped CONUS for the 1st pack, and $2.00 for each add'l.

If you need more than 5, I'll work out a break for that.

SPECIAL OFFER!!

Everyone that confirms their order by sending $$ to my Paypal account before Sunday, 12PM PST, May 6, 2012 will get a free 820pf cap with each pack.

All orders should be placed at:

BYOCRBMoA@gmail.com

My Paypal address is also BYOCRBMoA@gmail.com

phreek · **Posted:** Fri May 04, 2012 7:03 pm

how much of a difference would it make if i used close values instead?
this is what i used..
klone mine
422k 390k
392k 390k

other small differences on resistors here and there..
caps are good tho. i ask cause my build is not workin.

donovan · **Posted:** Fri May 04, 2012 7:29 pm

Im in for 2 builds worth as well.

crbmoa · **Posted:** Fri May 04, 2012 10:15 pm

phreek wrote:

how much of a difference would it make if i used close values instead?
this is what i used..
klone mine
422k 390k
392k 390k

other small differences on resistors here and there..
caps are good tho. i ask cause my build is not workin.

In my world, 10% is close enough for OD/Dirt circuits. I usually run closer, but I wouldn't bat an eye at those values, and they certainly aren't enough to kill a build!

I am wrapping up packages to mail on Monday. Keep the orders coming, fellas!

cb

Lincoln1 · **Joined:** Sun May 24, 2009 7:46 am **Posts:** 10

Hey if you'll ship to Canada I'm down for 3 sets.

crbmoa · **Posted:** Sat May 05, 2012 8:07 am

I will totally ship to Canada. Just add $1.00 for the slightly higher postage and messing with a customs form.

No problem.

duhvoodooman · **Posted:** Mon May 07, 2012 9:58 am

Yeah, I could use a couple, too.

crbmoa · **Posted:** Mon May 07, 2012 10:05 am

I have baggies going out today, and I have a LOT more baggies available!

crbmoa · **Posted:** Mon May 07, 2012 10:12 am

I will send a confirmation email to those of you that have sent me money and information to the gmail address.

They LOVE me at the P.O. 'round these parts!

defaced · **Posted:** Mon May 07, 2012 12:13 pm

I need to check my parts stash, I think I have everything but the 430k resistor, but if I'm missing more than that, I'll be in on this for two sets.

seven64 · **Joined:** Tue Jun 28, 2011 11:45 pm **Posts:** 9

paypal'ed and emailed for 4 packs.

crbmoa · **Posted:** Wed May 16, 2012 7:09 pm

Hey Fellas,

Here's the deal.

As far as I can tell, NOBODY has recieved these parts I sent. I have a funny story about a guy at the local post office, who is a long standing customer of a pro builder you all have heard of, so maybe he is now a mole trying to kill my business! HAHA

Either that, or possibly more likely, since I mailed nearly all of them on the same day, there is a box of little padded envelopes stiing somewhere on a loading dock that lost it's way.

I really don't mind repacking some bits and sending them again. It is therapy for me, anyway.

But a couple Yankees and one Canadian that expressed an interest in these bits never sent me any $$ or information.

So if y'all want to be included in the next shipment, let me know, please!

cb

guitarmageddon · **Posted:** Wed May 16, 2012 7:22 pm

I'd be in for a couple of sets please...and I will pay

crbmoa · **Posted:** Wed May 16, 2012 7:26 pm

Paypal and contact address:

BYOCRBMoA@gmail.com

Which makes me just about out.

I can do more packs with an extra 4-5 day turn, becuase I am ordering stuff anyway.

I have one cap value that y'all bought 20 of!

sjaustin · **Posted:** Thu May 17, 2012 7:51 am

Confirmation that I did not receive mine. I had forgotten about it until now, heh. Sorry for your extra hassle, bah.

defaced · **Posted:** Thu May 17, 2012 8:25 am

Yep, no love on receiving mine either. I'll post up when it comes in though.

seven64 · **Joined:** Tue Jun 28, 2011 11:45 pm **Posts:** 9

I ordered pretty late in the game but haven't got mine either. Thanks for the honest update tho man!

Sent from my DROIDX using Tapatalk 2

crbmoa · **Posted:** Wed May 23, 2012 11:29 am

Double Update:

First, I am reshipping the last of the packages today or tomorrow.....once again, thanks for your patience. What should have been a simple helping hand turned into a pain in the A$$.

Also, because I ran out of one value of caps, I needed to buy some more, and this is the sad part.

Cascade Surplus was able to provide me with 20 caps that I needed to refill my orders. But VERY sadly, they are closing up shop.

If you live in Portland, Oregon, or near it, you should stop in and visit one of the last places I know of where you can still walk in and see thousands of bits, just laying in bins, waiting to be fondled and picked and taken home to become part of your favorite circuit.

Not trying to be funny. I will miss them.

Chris

Build Your Own Clone Message Board

Help for hard to find Klone parts

Who is online